Application Methods
Suitable application methods for Purolyt Disinfectant Concentrate are spraying, fogging, wiping and immersing, depending on what you wish to disinfect. To disinfect water, Purolyt Disinfectant Concentrate can be added directly. For detailed information, please refer to the instructions for use.
Wiping
This is primarily used for disinfecting surfaces. We recommend to uniformly spray the surfaces and to wipe them subsequently. It is important to ensure that the surfaces you wish to disinfect are completely wetted. Please respect the necessary exposure time.
Spraying
This can be employed anywhere where wiping proves impracticable for disinfecting surfaces, e.g. in the case of surfaces with poor accessibility. For spraying, regular commercially available pressure sprayers may be used. It is important to ensure that the surfaces you wish to disinfect are completely wetted.
Fogging
Cold fogging allows for a uniform droplet size as well as for an optimal distribution of the aerosol. This is particularly suitable for disinfecting air in spacious rooms. It is important to ensure that the surfaces you wish to disinfect are completely wetted.
Immersion
Any parts with a complex geometry and/or cavities can be immersed in a diluted solution of Purolyt. Tubes and hoses may be flushed with Purolyt solution. Please respect the necessary exposure time.
Direct Addition
To disinfect raw water, Purolyt can be added directly to the water you wish to disinfect.